Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Component arrangement of front air-spring strut
1 - Hexagon-head bolt
2 - Mounting saddle
3 - Hexagon nut
4 - Spring-strut mount
5 - Sealing ring
6 - Residual pressure retaining valve
7 - Air spring
8 - Rubber stop
9 - Shock absorber
10 - Sealing ring
11 - Boot/bellows
12 - Clamp
Disassembling and assembling
Disassembling spring strut
Caution:
The air-spring strut is pressurized with approx. 3 bar residual pressure. Never us an impact bolter to loosen the fastening screws. Do not
bend over the mounting saddle during disassembly.
-
Risk of injury from the pressurized air-spring strut when loosening the screws.
-
Always unscrew the screws on the mounting saddle by one turn only, on alternating sides. During disassembly, allow the air to escape by tilting the
mounting saddle slightly.