Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Compressor/Pump: Service and Repair
Removing and installing compressor for the level control system
Preliminary work
1. Raise vehicle at the jacking points provided.
2. Remove right cover.
Removing the compressor
The compressor -3- is only installed for the level adjustment system and is attached as a compact air supply unit with valve block -4- on a
vibration-insulated support to the right underbody.
-1- - Air-spring strut, front axle
-2- - Air-spring strut, rear axle
-3- - Compressor
-4- - Valve block
Caution
Residual air can escape when removing the air lines.
-
Wear protective goggles.
Information
^
Place the take-up plates of the platform lift at the jacking points so that the fastening points of the underbody panel are accessible.