Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
^
To bleed the level adjustment system (compressed air must be released from the system), use the Porsche System Tester. To do this, in the system
>> Level adjustment >> select the menu item >>Bleed << and bleed the accumulator, and front and rear axles.
^
Clean the screw connection of the lines from the valve block before removing.
^
Protect the screw connection of the lines from dirt with suitable plugs.
1. Unclip the suction line and the plug connections -arrows-.
2. Remove the air lines (color-coded) from the valve unit and the brown air line (running under the valve unit).
3. Release the mounting points on the body -A, B & C- and remove the compressor unit (compressor, valve block).