porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Power Steering Fluid Cooler > < Checking|Page 3490
Page 2
background image

INFORMATION:  The MAX mark can be easily exceeded at higher temperatures.

1. Start engine and run it at idle speed for approx. 20 seconds. Switch off engine.

2. Open engine cover and open the lid of the engine compartment cover.

3. Open reservoir cap.

4. Wipe dipstick. Close and then reopen cap. The fluid level must be in the indicated range (MAX/MIN level at approx. 20 °C). Top up with

Pentosin if necessary.

Checking bellows on steering gear

INFORMATION:
-

The bellows on the steering gear can be damaged by outside influences, for example by stone damage or during assembly work.

-

The steering gear can start to leak if dirt or moisture enters a leaky bellows.

-

Visually inspect the bellows for damage.

Power Steering Fluid Cooler > < Checking|Page 3490