Sun roof sunshade
- Make
- Rover
- Model
- 200 Body Repair Manual
- Year
- 1995–1999
- Section
- Sunroof › Sun roof sunshade
BodySun roof sunshade
SUN ROOF SUNSHADE
Service repair no - 76.82.03
Remove
- Remove sun roof glass. See this section.
- Close sunshade.
- Depress front sunshade plungers and release front of sunshade from sun roof frame.
- Remove 2 screws securing frame cross beam to gain access to rear plungers.
- Depress rear sunshade plungers.
- Remove sunshade from frame by pulling forwards and upwards.
Refit
- Fit sunshade to frame and secure all 4 plungers.
NOTE: Ensure plungers are fully engaged.
- Fit and tighten screws securing cross beam to frame.
- Fit sun roof glass. See this section.
SUN ROOF SWITCH
Service repair no - 76.82.59
Remove
- Remove finisher from switch.
- Remove 2 screws securing switch to roof.
- Release from roof and disconnect multiplug.
- Remove switch.
Refit
- Position switch to roof and connect multiplug.
- Fit switch to roof and secure with screws.
- Fit finisher to switch.
Parts & tools for this job For 1995 Rover 200
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Rover touch up paint
- PARTPanel clip assortmentSearch: Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.