Workshop Manuals Factory service & repair Rover
Rover 200 Body Repair Manual (1995-1999)06 · Panel repairs
06 · General

Offer Up and Align (Panel repairs) (page 2 of 3)

Make
Rover
Model
200 Body Repair Manual
Year
1995–1999
Section
Procedures
Panel repairsOffer Up and Align · page 2 of 3
Diagram
  1. Use a resistance spot welder where access permits. Try to ensure weld quality by using a welding monitor where possible.
Use a resistance spot welder where access permits. Try to ensure weld quality by using a w
  1. MIG tack weld butt joints and re-check alignment and panel contours where necessary. Ensure that a gap is maintained to minimise welding distortion, by inserting a hacksaw blade as an approximate guide.
MIG tack weld butt joints and re-check alignment and panel contours where necessary. Ensur
  1. Dress MIG tack welds using a sander with 36 grit disc, or a belt-type sander where access is limited.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.