Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)21 · Drive shafts
21 · Transmission

Drive shaft gaiter - inner

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Drive shaft gaiter - inner
Drive shaftsDrive shaft gaiter - inner

DRIVE SHAFT GAITER - INNER

Service repair no - 47.10.16

Remove

  1. Raise front of vehicle.

WARNING: Support on safety stands.

  1. Remove drive shaft damper. See this section.
  2. Release both gaiter clips and discard.
  3. Slide gaiter from shaft.

Refit

  1. Clean shaft and gaiter.
  2. Fit gaiter to shaft.
  3. Secure gaiter with clips.
  4. Fit drive shaft damper. See this section.
  5. Remove stand(s) and lower vehicle.

DRIVE SHAFT AND INNER JOINT

Service repair no - 47.10.25

Remove

  1. Raise front of vehicle.

WARNING: Support on safety stands.

  1. Remove drive shaft outer joint. See this section.
  2. Release damper securing clip and discard.
  3. Slide damper from shaft.
  4. Fit new drive shaft to vice.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.