Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)26 · Restraint systems
26 · Body & interior

Warning labels (page 2 of 2)

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Precautions
Restraint systemsWarning labels · page 2 of 2
Diagram
  1. Airbag module - driver

A - ROVER Part Number/Bar code - If the airbag module is to be replaced, the code must be recorded and quoted for ordering purposes.

A - ROVER Part Number/Bar code - If the airbag module is to be replaced, the code must be
  1. Airbag module - passenger

A - ROVER Part Number/Bar code - If the airbag module is to be replaced, the code must be recorded and quoted for ordering purposes.

A - ROVER Part Number/Bar code - If the airbag module is to be replaced, the code must be
  1. Diagnostic control unit.

A - Refer to the Workshop Manual for information on the airbag system. B - ROVER Part Number/Bar Code - If the airbag diagnostic control unit is to be replaced, the code must be recorded and quoted for ordering purposes.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.