Hazard
- Make
- Rover
- Model
- 600 Electrical Library
- Section
- Instrument operation › Hazard
Hazard
Voltage is fed to the hazard warning light on a W/G wire from fuse 44 in the engine compartment fuse box. Earth is provided by the hazard warning switch on a G/W wire.
Engine Immobilisation
Voltage is fed to the engine immobilisation light on a W/Y wire from fuse 35 in the engine compartment fuse box. Earth is provided by the engine immobilisation control unit on a U/G wire.
Panel illumination
To ensure an even spread of light for panel illumination, six bulbs are used, four in the back and two on the top. When the sidelights are switched ON, a variable voltage according to the setting of the instrument panel rheostat, is provided to the panel lamps on the R/B wires. The earth return paths are provided on R wires through the instrument panel rheostat.
Parts & tools for this job For Rover 600
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 600
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.