Torque wrench settings
- Make
- Rover
- Model
- 600 620 Diesel Repair Manual Supplement
- Year
- 1995–1999
- Section
- Data, torque & tools › Torque wrench settings
Engine management systemTorque wrench settings
TORQUE WRENCH SETTINGS
Exhaust manifold elbow to turbocharger,
| nuts | 25 Nm |
| Turbocharger to exhaust manifold, nuts | 25 Nm |
| Oil drain pipe to turbocharger, bolts | 8 Nm |
| Exhaust front pipe to manifold, nuts | 25 Nm |
| Oil feed pipe to turbocharger, banjo bolt | 18 Nm |
| Turbocharger pipe to rear of cylinder head, | |
| bolts | 25 Nm |
| Turbocharger pipe to front of cylinder | |
| head, bolt | 9 Nm |
| Radiator top mounting bracket, bolts | 9 Nm |
| Air conditioning pipe bracket to | |
| bonnet locking platform, bolt | 9 Nm |
| Air conditioning pipe bracket to | |
| LH fan cowl, bolt | 9 Nm |
| Alternator terminal nut | 4 Nm |
| Glow plugs | 20 Nm |
| Coolant outlet elbow to cylinder head, | |
| bolts | 25 Nm |
| Injector clamp plate bolts | 23 Nm |
| Injector pipe unions to injection pump | 28 Nm |
| Injector pipe unions to injectors | 28 Nm |
| Intake pipe to inlet manifold, bolts | 25 Nm |
| EGR recirculation pipe to inlet | |
| manifold, bolts | 25 Nm |
| Intake pipe to support bracket, bolt | 9 Nm |
| Injection pump shaft clamp bolt | |
| (spacer fitted) | 10 Nm |
| Injection pump shaft clamp bolt | |
| (spacer removed) | 12 Nm |
| Fuel return to injection pump banjo | |
| bolt adaptor | 25 Nm |
| Fuel return to injection pump, banjo | |
| bolt | 25 Nm |
| Fuel inlet to injection pump banjo | |
| bolt adaptor | 25 Nm |
| Fuel inlet to injection pump, banjo | |
| bolt | 25 Nm |
| Abutment bracket to injection pump, | |
| Allen bolts | 8 Nm |
| Fuel shut-off solenoid | 20 Nm |
| Injection pump mounting nuts | 25 Nm |
| Injection pump support bracket to | |
| engine, bolts | 25 Nm |
| Injection pump abutment bracket to | |
| support bracket, nuts and bolts | 25 Nm |
| Injection pump gear nut | 60 Nm |
| Manifold pressure sensor to bracket, | |
| bolts | 9 Nm |
| Intake air temperature sensor | 12 Nm |
| Crankshaft sensor bolt | 8 Nm |
| Alternator top mounting bolt(s) | 25 Nm |
| Coolant temperature sensor | 5 Nm |
| Pedal box to bulkhead, nuts | 13 Nm |
Parts & tools for this job For 1995 Rover 600
- PARTEngine gasket setSearch: Rover 600 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.