04 · Engine

Torque settings

Make: Rover
Model: Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual
Section: Data, torque and tools › Torque settings

Engine 1.4 K8Torque settings

TORQUE SETTINGS

Spark plug cover screws	2 Nm
Camshaft timing belt tensioner, backplate screw	10 Nm
Camshaft gear bolt	35 Nm
Camshaft timing belt tensioner, pulley bolt	45 Nm
Camshaft timing belt, cover bolts	9 Nm
Distributor rotor arm, Allen screw	8 Nm
Distributor cap screws	3 Nm
Camshaft timing belt rear cover plate bolts	10 Nm
Fuel filter union	35 Nm
Cylinder head bolts:*
All bolts	20 Nm
Turn all bolts through 180°
Turn all bolts through another 180°
Manifold support struts – Alloy inlet manifold	25 Nm
Brake servo banjo bolt – Alloy inlet manifold	50 Nm
Engine front mounting bracket bolts	45 Nm
Heat shield bolts and nuts	6 Nm
Gearbox filler and drain plugs	25 Nm
Engine sump drain plug	42 Nm
Lifting bracket bolts	9 Nm
R.H. engine mounting to engine, nuts	100 Nm
R.H. engine mounting through bolt	82 Nm
Gearbox mounting bracket bolts	100 Nm
L.H. engine mounting to body bolts	45 Nm
L.H. engine mounting to gearbox bolts	60 Nm
Dipstick tube bolt	9 Nm
Expansion tank bolts	9 Nm
Compressor mounting bracket bolts	45 Nm
Alternator, M10 bolt	45 Nm
Alternator, M8 bolt	25 Nm
Alternator heat shield nut and bolts – If fitted	6 Nm
Battery tray support bracket bolts	9 Nm
Fusebox mounting bracket bolts	9 Nm
Battery tray bolts	9 Nm
Engine steady bar to gearbox, bolts	100 Nm
Engine steady bar to body, bolt	85 Nm
Road wheel nuts	100 Nm
Reluctor ring screws	3 Nm
Flywheel bolts	85 Nm
Engine sump bolts	10 Nm
Anti-beaming bracket:
Support bracket bolt	45 Nm
Differential housing bolt	90 Nm
Flywheel lower cover plate bolts	9 Nm

*Tighten in sequence.

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.