9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-2090004.png)
15. Set the automatic stop.
16. Feed out the tool holder and manually grind off the outer and inner rusty edges.
17. Set the turning depth and switch on automatic operation.
18. Check the brake disc.
19. Remove the lathe. Remove the connecting plate.
20. Fit the brake caliper.
21. To grind (turn) the other side, the lathe will have to be turned upside down.
22. Grinding (turning) is then carried out as described above.
