saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Tail Lamp Wiring Harness Replacement (Coupe)|Page 12916 > < Tail Lamp Wiring Harness Replacement (Coupe)|Page 12914
Page 1
background image

Tail Lamp: Service and Repair
Tail Lamp Wiring Harness Replacement (Sedan)

Tail Lamp Wiring Harness Replacement (Sedan)

Removal Procedure

Warning:  Refer to Battery Disconnect Warning   (See: Starting and Charging/Battery/Service Precautions).

Note:  Replace or repair wiring harnesses observing the safety regulations of electric/electronics.

1. Disconnect the battery.
2. Remove the rear compartment side panel. Refer to Rear Compartment Side Trim Panel Replacement (Coupe)   (See: Body and Frame/Interior

Moulding / Trim/Trim Panel/Service and Repair)Rear Compartment Side Trim Panel Replacement (Sedan)   (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair).

3. Remove the wiring harness, rear end panel.

*

Disconnect the 7 wiring harness plugs.

*

Disconnect the ground connection.

*

Remove the nut.

*

Release the 16 clips.

Tail Lamp Wiring Harness Replacement (Coupe)|Page 12916 > < Tail Lamp Wiring Harness Replacement (Coupe)|Page 12914