Astra L4-1.8L (2009)
*
Remove the wiring harness.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the wiring harness, rear end panel.
*
Position the wiring harness.
*
Install the 16 clips.
*
Connect the ground connection.
Tighten the nut to 5 Nm (44 lb in).
*
Connect the 7 wiring harness plugs.
2. Install the rear compartment side panel. Refer to Rear Compartment Side Trim Panel Replacement (Coupe) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair)Rear Compartment Side Trim Panel Replacement (Sedan) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair).
3. Connect the battery.
4. For reprogramming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).