ION L4-2.2L VIN F (2004)
15. Disconnect the electrical connector from the park/neutral position switch, and reposition the wiring harness toward the engine.
16. Disconnect the vacuum check valve (1) from the brake booster and position aside the check valve (1) and vacuum hose (3).
17. Disconnect the evaporative emission (EVAP) purge hose from the purge solenoid. Reposition the purge hose toward the engine.
18. Position the underhood electrical center (1) further toward the LH hood hinge, and secure the center in place.
19. Install the engine support fixture.
20. Raise and support the vehicle.
21. Remove the thru-bolt from the front transmission mount.