ION L4-2.2L VIN F (2004)
22. Remove the thru-bolt and heat shield from the rear transmission mount.
23. Lower the vehicle. Leave the vehicle positioned on the hoist.
24. Remove the transmission side mount-to-transmission bolts.
25. Using the engine support fixture, slowly lower the transmission approximately 25 mm (1 inch).
26. Position the master cylinder pipes rearward and outboard, behind the wiring harness along the strut tower.
27. Remove the accelerator pedal mounting nuts. Reposition the accelerator pedal to improve tool access to the LH, lower booster mounting nut.
28. Loosen the brake booster mounting nuts.
29. Remove the retaining clip (1) and washer (2) from the brake pedal.
30. Release the brake booster pushrod (3) from the brake pedal.