saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Sunroof Sunshade - Binds/Rattles In Tracks|Page 9977 > < Sunroof Sunshade - Binds/Rattles In Tracks
Page 2
background image

CLAIM INFORMATION:

To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.

Condition 1

Condition 1: Sunroof sunshade rattles and/or binds. Models affected:

^

1997 Coupes built before and including VIN VZ356663

^

1996-1997 Sedans and 1998 Sedans built before and including VIN WZ115345

Condition 2

Condition 2: Black plastic cable tubing is misrouted. Models affected:

^

1997-1998 Coupes

^

1996-1998 Sedans

Condition 3

Condition 3: Rear beam tabs loose at side rails. Models affected:

^

1997 Coupes built before and including VIN VZ356663

^

1996-1998 Sedans built before and including VIN WZ147299

1.

Remove headliner. (Refer to appropriate year "Body/Repair Service Manual.")

2.

Partially loosen the sunroof module fasteners from sunroof module, and allow the sunroof module to drop in the rear without fully removing the
fasteners.

3.

Remove the sunroof sunshade stops on each side of the sunroof module.

NOTICE

Proper location of the screw is critical for sunshade operation. If screw is placed too far forward, sunroof glass panel when open, will cause sunshade
to bind.

4.

Measure 3 mm (0.118 in.) forward from the front edge of the sunroof sunshade stop as shown as dimension "A" in the illustration, and mark the
location on rail for both sides.

Sunroof Sunshade - Binds/Rattles In Tracks|Page 9977 > < Sunroof Sunshade - Binds/Rattles In Tracks