SW1 L4-1.9L SOHC VIN 8 (1996)
g. Install the fixed chain guide and check for clearance between the guide to cylinder block and head. The guide must be installed with the word
FRONT facing forward away from the cylinder block.
-
Torque: 26 Nm (19 ft lbs).
IMPORTANT: The timing chain should be snug against the fixed guide.
h. Install the pivoting chain guide. Check for clearance between the block and head. Torque the bolt and make sure the guide pivots freely.
-
Torque: 26 Nm (19 ft lbs).
i.
Retract the tensioner plunger and pin the ratchet lever using a 3.18 mm (1/8 in. No.31) drill. Install the chain tensioner and torque the two
bolts. Remove the drill and allow the tensioner plunger to extend.