tC L4-2.4L (2AZ-FE) (2005)
f.
Remove the 2 bolts and charcoal canister.
7. INSTALL CHARCOAL CANISTER ASSEMBLY
a. Temporarily hook the claw of the charcoal canister bracket around the fuel tank hoses, and install the charcoal canister with the 2 bolts.
Torque: 19 N.m (194 kgf.cm, 14 ft.lbf)
b. Install the fuel vent hose.
1. Align the fuel tube connector with the pipe, then push in the fuel tube connector until the contacts the seat to contact the fuel tank vent hose
to the pipe,then push up the retainer to the claws lock.
NOTE:
-
Check that there are no scratches or foreign objects around the connected part of the fuel tube connector and pipe before performing this
work.
-
After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling the fuel tube connector and
pipe.