tC L4-2.4L (2AZ-FE) (2005)
c. Connect the fuel tank vent hose.
1. Align the fuel tank vent connector with the pipe, then push in the fuel tank vent connector until the retainer makes a "click" sound to
connect the fuel tank vent hose to the charcoal canister.
NOTE:
-
Check that there are no scratches or foreign objects around the connected part of the fuel tank vent connector and pipe before this work.
-
After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling the quick connector.
d. Install the fuel emission hose and clamp.
e. Install the leak detection pump connector.
8. INSTALL REAR SUSPENSION BRACE LOWER RH
9. INSTALL FUEL TANK PROTECTOR NO.1
10. INSTALL EXHAUST PIPE ASSEMBLY CENTER
11. INSTALL FLOOR PANEL BRACE FRONT
12. CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
13. CHECK FOR EXHAUST GAS LEAKAGE