xA L4-1.5L (1NZ-FE) (2006)
8. CONNECT SUCTION HOSE SUB-ASSEMBLY
a. Remove the vinyl tape attached to the hose and condenser.
1. Lubricate 2 new O-rings with compressor oil and install them to the hose.
Compressor oil: ND-OIL 8 or equivalent
b. Connect the suction hose and piping clamp.
1. Connect the bracket with the bolt.
Torque: 9.8 N.m (100 kgf.cm, 7 ft.lbf)
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
11. CHECK SRS WARNING LIGHT
a. Check the SRS warning light.
12. CHARGE REFRIGERANT
13. WARM UP ENGINE
14. CHECK FOR LEAKAGE OF REFRIGERANT