–
| Unscrew the inspection cover for the oil level -arrow-. |
–
| The oil level is correct when the oil reaches the lower edge of the filling inlet. |
–
| Tighten the inspection cover for the oil level -arrow-. |
In order to completely fill the tank with new oil you must: |
–
| Unthread the control top for the oil level. Fill with oil up to the inner edge of the hole for filling. |
–
| Tighten the control top for the oil level and put the engine into gear, let the gearbox tick over for about 2 minutes by engaging a gear. |
–
| Stop the engine, unthread the control top and check the oil level again, fill up if necessary. |
|
|
|