seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch pump: removing and installing > < Clutch actioning mechanism: repairing

Leon Mk1

Removing
Removing
–  With the ignition switched off disconnect battery earth strap.
  Note!
For vehicles fitted with a coded radio, first check the anti-theft code.
l  Remove the air filter, if fitted on the left of the engine bay:
–  Release the air temperature sender connector.
–  Remove the air filter vacuum hose.
–  Release the inlet manifold hose.
   
–  Remove the air filter securing bolts -arrows-.
–  Remove the air filter complete with the inlet hose.
  E37-0033
–  Disconnect coolant fluid level sensor connector, if present, arrow -1-.
–  Separate the side cover of the coolant liquid reservoir pulling upwards.
–  Remove the coolant liquid reservoir arrow -2- and place it on one side without forcing any of the hoses.
  Note!
t  Do not open the cooling system.
t  When handling the brake fluid hoses, ensure that no liquid falls on the bodywork or on any other element.
  E30-0047
–  Pull off the return hose -A- that goes from the brake fluid deposit and seal it.
–  Remove clip -B- for the clutch pump pipe/hose by levering.
–  Remove all the pipework/hose -C- from the clutch pump and seal openings.
–  Remove the clutch pump securing bolts -D-.
–  Remove the shelf and lower cover on the driver's side → General body repairs, assembly work, interior; Rep. Gr.68.
–  Remove the main junction box from its fixing point and leave it hanging, moved aside.
–  Move aside any electric cables that are in the way.
  Note!
Do not separate the cables from their connectors nor remove the relays.
  N30-0303
–  Remove lower part of the protective cover from the pedal assembly bracket To do so release from the upper part -arrow 2- and move down -arrow 1-.
Unblock the clutch pump actioning rod from the clutch pedal as follows:
  E30-0065
–  Fit tool -T20059 B- on the housing lugs. Adjust the length of the points -T20059B/2-, in such a way that the pliers are left slightly opened.
–  Press the housing lugs with tool -T20059B- and remove the rod from its housing outside the clutch pedal, pulling in the direction of movement.
–  Remove clutch pump from the engine bay.
  E30-0096

Clutch pump: removing and installing > < Clutch actioning mechanism: repairing