Leon Mk1
5Gang - Installation overview |
1 - | Sleeve |
q | For 5th gear needle bearing |
q | Release along with the rigid radial bearing bush allotment → Chapter |
q | Replace along with → Item |
2 - | Needle roller bearing |
q | For 5th gear |
q | removing and fitting → Chapter |
q | Replace along with → Item |
3 - | 5th speed selector gear |
q | removing and fitting → Chapter |
4 - | Synchromesh ring of 5th gear: |
q | removing and fitting → Chapter |
q | Check for wear → Chapter |
5 - | Mobile sleeve with 5th gear synchromesh |
q | removing and fitting → Chapter |
q | Disassembling and assembling the heating system → Chapter |
6 - | Circlip |
q | replace |
q | Strength determined → Fig. |
7 - | Limit ring |
q | Holds the locking pins in place |
q | removing and fitting → Chapter |
8 - | Spring |
q | Installation position: the slanted end should point towards the locking pin |
9 - | Mobile sleeve of 5th gear |
10 - | Synchromesh for 5th gear |
11 - | Locking element |
q | 3x |
12 - | Spring |
q | Installation position: the slanted end should point towards the locking pin |