SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Multi-function switchF125 : removing, fitting and adjustment >
< Gearbox input speed senderG182 : removing and fitting
Leon Mk1
09G automatic gearbox
Automatic gearbox, gears, control
Removing and installing the oil sump, oil strainer, selection unit and internal cable harnesses
Gearbox output speed senderG195 : removing and fitting
Gearbox output speed senderG195 : removing and fitting
Gearbox output speed sender -G195 -: removing and fitting
Note
t
Rules of cleanliness to be taken into account when working on the automatic gearbox
→ Chapter
.
t
General repair instructions.
→ Chapter
Gearbox output speed sender -G195 -: removing
WARNING
Take all measures concerning the disconnection of the battery
→ Electrical system; Rep. gr. 27
.
–
Remove cover
-1-
above the battery. To do this press the release tab
-arrow-
.
–
Disconnect battery earth strap
-arrow-
with the ignition switched off.
–
Remove oil pan
→ Chapter
.
–
Remove oil strainer
→ Chapter
.
–
Remove the selection unit
→ Chapter
.
–
Unscrew the bolt
-2-
.
–
Extract the Gearbox output speed sender -G195- from the gearbox housing along with the cable
-B-
.
Gearbox output speed sender -G195 -: fitting
Installation is carried out in reverse order, noting the following:
–
Moisten the O-ring of the sender with ATF.
–
Carefully pressing, insert the Gearbox output speed sender - G195 - into the gearbox all the way.
Component
Nm
Gearbox output speed sender -G195- to the gearbox, bolt M5
6,5
09G automatic gearbox
Automatic gearbox, gears, control
Removing and installing the oil sump, oil strainer, selection unit and internal cable harnesses
Gearbox output speed senderG195 : removing and fitting
Multi-function switchF125 : removing, fitting and adjustment >
< Gearbox input speed senderG182 : removing and fitting