Leon Mk1
| Clutch release mechanism: Assembly overview |
| 1 - | Release bearing |
| q | Remove and install together with clutch release lever → Item and guide sleeve → Item → Fig. to → Fig. |
| q | Do not wash the clutch release lever, only wipe it with a piece of cloth |
| q | Renew noisy bearings |
| 2 - | Bolt, 5 Nm and tighten 90 º more |
| q | Always replace. |
| 3 - | Clutch release lever |
| q | Remove and install together with clutch release collar → Item and guide sleeve → Item → Fig. to → Fig. |
| q | Remove any traces of grease |
| 4 - | Retaining spring |
| q | Secure to clutch release lever |
| 5 - | Guide sleeve |
| q | Removing and installing together with clutch release collar → Item and clutch release lever → Item → Fig. to the → Fig. |
| 6 - | Join ring for the input shaft |
| q | Removing and installing → Chapter>>>>>>>> |
| 7 - | Ball head stud, 20 Nm |
| q | Remove any traces of grease |
| q | Apply lubrication |
| 8 - | Gearbox: |
| 9 - | Hexagon bolt, 20 Nm |
| 10 - | Spring retainer |
| 11 - | Slave cylinder |
| q | removing and fitting → Chapter |
