seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gearbox mechanics,operation, construction,diff. > < Clutch release mechanism: Assembly overview

Leon Mk1

Repairing clutch release mechanism
Repairing clutch release mechanism
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Torque wrench kit -SAT 8010-, see equivalent → Anchor
  L00-10226
Removing and installing clutch release lever
–  Remove bolts -arrows-.
–  Remove clutch release lever using the clutch release collar and input shaft and knuckle pin guide sleeves.
Installation is carried out in reverse order.
  A30-0066
Removing and installing guide sleeve
–  Detach the guide sleeve -3- from the clutch release collar -2- by pressing upwards.
–  Rotate guide sleeve -3- about 90º towards -arrow- in relation to the clutch release collar -2- until the tabs of the guide sleeve are in the recesses -4- of the clutch release collar.
–  In this position, extract the guide sleeve for the clutch release bearing.
Installation is carried out in reverse order. Tightening torque → Item
  N30-0354
Removing and installing release bearing
–  Press locking lugs -arrows- together on reverse side of clutch release lever and remove release bearing -A- from clutch release lever.
–  To install, press release bearing -A- into clutch release lever until retaining lugs -arrows- engage.
  A30-0068

Gearbox mechanics,operation, construction,diff. > < Clutch release mechanism: Assembly overview