Leon Mk1
Control unit: Assembly overview |
1 - | Thrust piece |
q | For selector shaft |
q | Pressing off → Fig. |
q | Pressing in → Fig. |
2 - | Selector shaft with selector shaft cover |
q | Always replace together |
3 - | Retaining bolt |
q | For adjusting selector mechanism |
q | Removing → Fig. |
q | Pressing in → Fig. |
4 - | Return lever |
q | Two versions: Made of metal or plastic |
5 - | Mounting bush |
q | Not required for plastic relay lever |
6 - | Seal |
q | Remove levering with a screwdriver |
q | Fitting → Fig. |
7 - | Cap |
q | For gearbox breather |
8 - | Gearbox selector lever |
q | Position so that the teeth free area is inserted on the selector shaft |
q | Can be renewed with the selector mechanism installed |
9 - | 20 Nm hexagonal nut |
q | Always replace. |
10 - | Retainer washer |
q | Always replace. |
q | Not required for plastic relay lever |