seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing ATF cooler > < Dismantling and assembling procedure

Leon Mk1

Removing ATF cooler
Removing ATF cooler
–  First check whether a coded radio is fitted. In this case, obtain anti-theft code.
–  Move selector lever to “P” position.
–  With the ignition switched off, disconnect the battery earth strap.
   
–  Remove trim -1- for air duct -arrows-.
–  Remove trim -2- for battery.
–  Pull connector off coolant expansion tank.
–  Unbolt coolant expansion tank and place to side. Do not open cooling system.
–  Remove battery and battery tray → Electrical system; Rep. Gr.27.
–  Tie up coolant tank, e.g. with wire.
–  Pull cable duct and cables forwards.
  E70-10039
–  Clamp-off ATF cooler hoses with hose clamps -3094- and detach at ATF cooler.
  N37-0859
–  Remove ATF cooler -1- from gearbox -arrow A-.
  N37-0799

Installing ATF cooler > < Dismantling and assembling procedure