Leon Mk1
|
| Special tools and workshop equipment required |
| t | Support sleeves -VW 244 B-, see equivalent → Anchor |
| t | Clutch press -VW 401-, see equivalent → Anchor |
| t | Clutch press -VW 402-, see equivalent → Anchor |
| t | Die -VW 412- |
| t | Tube element -VW 415 A- |
| t | Tappet -VW 433-, see equivalent → Anchor |
| t | Tube element -VW 519- |
| t | Engine and gearbox support -VW 540- |
| t | Attachment -30 - 23-, see equivalent → Anchor |
| t | Press tool -40 - 21- |
| t | Support -40 - 103- |
| t | Thrust pad -40 - 105- |
| t | Drive-in sleeve -41 - 501-, see equivalent → Anchor |
| t | Gearbox support -2004- |
| t | Interlocking mandril -2064-, see equivalent → Anchor |
| t | Tappet -3002-, see equivalent → Anchor |
| t | Door hinge alignment tool (M8 and M10) -3114/2- |
| t | Socket spanner -T10246- |
| t | Workshop press -V.A.G 1290 A- |
| t | Collecting tray -V.A.G 1306-, see equivalent → Anchor |
| t | Torque wrench -V.A.G 1331-, see equivalent → Anchor. |
| t | Torque wrench -V.A.G 1332-, see equivalent → Anchor. |
| t | Roller bearing bush extractor -V.A.G 1582- |
| t | Adapter -V.A.G 1582/12- |
| t | -1-Interior extractor -Kukko 21/2- |
| t | -2-Puller -Kukko 18/2- |
| t | Insertion plate -T40086- |
| t | Insertion plate -T40088/1- |
| t | -1-Two-arm puller -Kukko 20/10- |
| t | -2-Puller hook, length 200 mm |
| t | -2-Puller hook, length 250 mm |
| t | Calibre |
| t | 2 bolts M8 (length 70 mm) with washers |
| t | Sealant -AMV 188 001 02- |
| t | Slider -01E 311 120- |
| t | Locking fluid -AMV 185 101 A1- |
