seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Assembly overview - hydraulics (LHD) > < Removing

Leon Mk1

Installing
Installing
   
–  Set over-centre spring on pin -arrow 1- on mounting bracket and press into ball guide with clutch pedal fully depressed -arrow 2-.
–  Pull clutch pedal back to bolt stop -arrow 3-.
–  Connect clutch pedal to master cylinder → Chapter.
–  Install clutch pedal stop → Chapter.
  N30-0316
–  Tighten securing bolts -arrows- for master cylinder to specified torque → Item.
  N30-0315
–  Remove bolt and nut -arrow-.
–  Install clutch pedal switch -F36- → Item.
–  Hook relay plate into both retainers and screw in upper fastener → Electrical system; Rep. Gr.97.
–  Install covers on driver side → General body repairs, interior; Rep. Gr.68.
  N30-0320
–  Remove hose clamp -3094- from supply hose -A-.
–  Bleed clutch system → Chapter.
  N30-0329

Assembly overview - hydraulics (LHD) > < Removing