Leon Mk1
|
|
|
|
|
| 1 - | Hexagon nut, 20 Nm |
| q | Self-locking |
| q | Always renew |
| 2 - | Gearbox selector lever |
| q | Install so that master spline aligns with selector shaft |
| q | Can be renewed with the selector mechanism installed |
| q | Installation position → Fig. |
| 3 - | Shoe |
| q | Clip into relay lever → Item |
| 4 - | Bearing bush |
| 5 - | Relay lever |
| q | Installation position → Fig. |
| 6 - | Selector shaft |
| q | With selector mechanism cover |
| q | Can be removed and installed with gearbox installed |
| 7 - | Bearing bush |
| q | For selector shaft |
| q | Removing and installing → Item |
| 8 - | O-ring |
| q | Always renew |
| q | Insert in peripheral groove of selector mechanism cover |
| q | Coat with gear oil when installing |
| 9 - | Cap |
| q | For gearbox breather |
| 10 - | Securing clip |
| q | For relay lever |
| q | Removing → Fig. |
| 11 - | Seal |
| q | Lever out with a screwdriver |
| q | Installing → Fig. |
|
|
|
|
