Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk101 · Power transmission
01 · Transmission

General repair notes

Make
SEAT
Model
Leon Mk1
Section
6-speed manual gearbox 02N, four-wheel drive › Technical data › General repair notes
Power transmissionGeneral repair notes
Bearings
t  Install new tapered roller bearings as supplied and do not lubricate additionally.
t  Install needle bearings with lettered side (thicker metal) towards fitting tool.
t  Tapered roller bearings fitted to one shaft must be renewed as a set. Use same make of bearings.
t  Heat inner races to about 100° C with the inductive heater -VAS 6414- before installing.
t  Do not interchange outer or inner races of bearings of the same size. The bearings are matched in pairs.
   

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.