seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Seal between the gearbox and the pair of bevelled gears, in the pair of bevelled gears: replace > < Seal between the gearbox and pair of bevelled gears, in the gearbox: replace
Seal between the gearbox and the bevelled gears, in the gearbox: replace
Seal between the gearbox and the bevelled gears, in the gearbox: replace
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
   
Special tools and workshop equipment required
t  Extractor kit -T20143-, see equivalent → Anchor
t  Tray -T20173-, see equivalent → Anchor
t  Hose clamp -T10243-, see equivalent → Anchor

–  Remove the pair of bevelled gears → Chapter
–  Fit tray -T20173- beneath gearbox.
–  Remove input shaft seal by levering with the extractor -T20143/2-.
   
–  Fill half way with sealant grease → Spare parts catalogue the space between the sealant lip and the dust guard -arrow-
–  Lightly lubricate outer edge of new seal.
  N32-0001
–  Fit new seal as far as it will go using tappet -T10243-.
–  Install the bevelled gear → Chapter.
–  Check hydraulic oil level and top-up if necessary → Chapter.
  A34-10041

Seal between the gearbox and the pair of bevelled gears, in the pair of bevelled gears: replace > < Seal between the gearbox and pair of bevelled gears, in the gearbox: replace