seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gear change prongs: Repair > < Gearbox operation mechanism shaft seal: replace

Leon Mk1

Procedure
Procedure
–  Remove engine cover → Booklet2.
–  Remove the air filter housing, the air hose and the air conduit hoses → Rep. Gr.24 and → Rep. Gr.23.
–  Remove the idler rod → Chapter
   
–  Release the circlip -1- and, unscrewing the nut, remove the connection rod.
  A34-0620
–  Remove seal by levering with extractor -T20143/1-.
  A34-0635
–  Insert with the tool -T20153-.
The remainder of the installation is carried out in the reverse order to removal; noting the following:
  Note
The selector rod may only be placed in one position. Tightening torque → Item
–  Fit the battery → Rep. Gr.27.
  E34-10006

Gear change prongs: Repair > < Gearbox operation mechanism shaft seal: replace