seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil level in gearbox:|replace > < Oil level in gearbox:

Leon Mk1

Check and fill
Check and fill
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Torque wrench kit -SAT 8010-, see equivalent → Anchor
–  Place the vehicle on an elevator, so that it is horizontal.
–  Raise the vehicle.
–  Remove centre noise insulation → Bodywork, exterior fitting work; Rep. Gr.50.
  L00-10226
–  Unscrew the bolt with an allen key -arrow- for the oil filler hole.
l  Specification: oil level up to lower edge of filler hole
–  Tighten oil filler plug to corresponding torque.
–  Add gear oil if necessary; specification → Chapter.
–  Screw in oil filler plug. Tightening torque → Chapter.
When filled for the first time, ensure the following:
–  Fill with oil up to the lower border of the fill hole.
–  Screw in oil filler plug.
–  Turn the ignition on, select a gear and allow gearbox to turn for approx. 2 minutes.
–  Stop engine and unscrew oil filler plug.
–  Fill with oil up to the lower border of the fill hole once again.
–  Screw in oil filler plug. Tightening torque → Item.
  A34-0637

Oil level in gearbox:|replace > < Oil level in gearbox: