seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil level in the bevelled gear: > < Installing the bevel gear

Leon Mk1

Tightening torques
Tightening torques
   
Install the bracket for bevel gears with vehicles with petrol engine and assembly process
When installing the gearbox bracket, the following installation sequences must be maintained:
–  Screw in bolts -arrows 1- (hand-tight).
–  Tighten bolts -arrows 2- to 40 Nm.
–  Tighten bolts -arrows 1- to 40 Nm.
  A34-10106
Install bracket for bevel box on diesel engines with particulate filter and assembly process
Allocation of bolts:
  N34-10717
ItemBoltAmount
1M10 x 213
2M10 x 452
3M10 x 621

When installing the gearbox bracket, the following installation sequences must be maintained:
–  Screw in all bolts hand-tight.
–  Tighten bolts -arrows 2- and -arrow 3- to 40 Nm.
–  Tighten bolts -arrows 1- to 40 Nm.
   
Component Nm
Flange shaft (right-side) to differential33
Bevelled gear on the manual gearbox
t  Renew bolts
40
Pendulum support to gearbox
t  Renew bolts
40 + 90°
Heat protection shield of the right hand side drive shaft on the bevelled gear20

   

Oil level in the bevelled gear: > < Installing the bevel gear