SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Output shaft for 1st - 4th gear >
< Procedure
Leon Mk1
6-speed manual gearbox 02Q, all-wheel drive
Gearbox,mechanics,gears,shafts,internal operation
Adjusting output shaft for 1st?-?4th gear
Determining the correct secondary shaft shim
Determining the correct secondary shaft shim
The specified bearing preload is attained by subtracting the measured value (0.14 mm) from the inserted shim (1.70 mm) and adding a constant value for preload (0.20 mm).
Example:
shim fitted
1.70 mm
- Measured value
0.14 mm
+ Preload (constant)
0.20 mm
Thickness of shim
1.76 mm
–
Determine the thickness of the shim by using the table
→ Spare parts catalogue
.
–
Remove the gearbox casing and extract the outer ring of the roller bearing from it.
l
Extraction of the outer roller bearing rings and the bearing sockets using the extractor kit -T20140-.
–
Remove the shim fitted (1.70 mm) from the gearbox housing.
6-speed manual gearbox 02Q, all-wheel drive
Gearbox,mechanics,gears,shafts,internal operation
Adjusting output shaft for 1st?-?4th gear
Output shaft for 1st - 4th gear >
< Procedure