–
| Undo the three bolts -A-. |
–
| The bolts must be replaced. |
–
| Remove the transmission oil radiator from the gearbox -B- with the two O rings -C-. |
WARNING Coolant must not enter the gearbox! |
|
Installation is carried out in reverse order. The following must be taken into account: |
–
| Replace radiator O-rings. |
–
| Tighten the new bolts -A- with 20 Nm + 90° (1/4 turn). |
–
| Check the coolant level in the cooling system → Rep. gr.19. |
–
| Check the gear oil level and top up as necessary → Chapter. |
|
|
|