Leon Mk1
| Gear selection mechanism, from 03.2009: Assembly overview |
| 1 - | Selector lever |
| removing and fitting → Chapter |
| 2 - | Selector lever and gear selection mechanism with gear selector cable |
| q | Operate manual release mechanism → Chapter |
| q | removing and fitting → Chapter |
| q | Check and adjust the gear selector cable → Chapter. |
| q | Do not lubricate the gear selector cable |
| q | With integrated printed circuit for selector mechanism (selector lever - E313 -), do not touch |
| q | Incorporates tiptronic switch -F189- and selector lever lock solenoid -N110 -. These components can be tested in the „Guided Fault Finding“ mode → Vehicle diagnostic tester. |
| q | The tiptronic switch -F189- and selector lever lock solenoid -N110- can only be renewed together with the complete selector mechanism unit |
| 3 - | Bolt. |
| q | 8 Nm |
| 4 - | Hexagon flange nut |
| q | 8 Nm |
| q | 4x |
| 5 - | Lever protection box |
| 6 - | Locking plate |
| q | Replace after each removal |
| 7 - | Locking plate |
| q | Replace after each removal |
