SEAT Workshop Service and Repair Manuals

• Rollers
• ◆ Installing => Fig.1
• Springs
• ◆ Installing => Fig.1
• Cage
• ◆ Installing => Fig.2
• ◆ Securing => Fig.3
• Outer ring
• Piston
• ◆ Sealing lips are vulcanised to the piston
• ◆ Moisten sealing lips with ATF before installing
• ◆ Turn piston slightly when installing
• ◆ Installed position => Fig.4

→ Fig.1    Installing rollers and springs

• ‒ Insert springs so that the spring (arrow ) engages in the cage.

→ Fig.2    Inserting cage with springs and rollers

• ‒ Install with large lugs (arrow) facing up.

→ Fig.3    Securing cage

• ‒ Secure cage by turning in direction of arrow as far as the stop.

→ Fig.4    Installed position of piston

• ‒ Insert piston -A- as shown.