SEAT Workshop Service and Repair Manuals

Oil level is checked with gearbox installed

Final drive and front bevel box are filled together through the oil filler hole in the final drive.

Checking:

• ‒ → Remove plug -arrow- to check gear oil level and top gear oil up to lower edge of drilling.

Specification

• ‒ Install bolt.

Tightening torque: 20 Nm

When filling with new oil note following:

• ‒ Remove plug to check gear oil level and top gear oil up to lower edge of drilling.

Specification => Page 00-7

• ‒ Start engine, engage gear and allow gearbox to turn for approx. 2 minutes.
• ‒ Stop engine and check oil level.