Leon Mk1
3rd and 4th gear synchromesh general fitting diagram |
Take note of the number of discs and their assembly position when dismantling → Fig. |
Checking the clutch action → Anchor |
1 - | Circlip |
q | Remove by levering with a screwdriver |
2 - | Support disc |
q | Fitting → Anchor |
q | Determine thickness → Anchor |
3 - | Inner disc |
q | Fitting → Anchor |
q | Number of parts |
4 - | Outer disc |
q | Fitting → Anchor |
q | Number of parts |
5 - | Circlip |
q | Remove by levering with a screwdriver |
q | Fitting → Anchor |
6 - | Spring support plate |
q | With springs |
7 - | Seal |
q | Always replace |
8 - | Seal |
q | Always replace |
9 - | Piston |
q | The corresponding gearbox code is assigned to this spare part |
q | Before fitting, moisten the sealing lips with ATF |
q | On fitting, turn the piston slightly |
q | After fitting, it should be possible to rotate the piston in the clutch bell housing |
10 - | Clutch bell housing |