Leon Mk1
|
|
|
Note
t | Threaded plate -1- of striker pin is secured in pillar using a method which differs from the previous method. |
t | Bow outside of threaded plate is welded firmly to pillar. Webs to threaded plate are plastically deformable. |
t | Increased forced must be applied so that striker pin -2- can be adjusted with bolts -3- loosened. |
Note
t | Only the adjustment for the left front door is described. The adjustment of the right front door is similar. |
t | The front door must lock fully when closing without any additional force being required and must not have any play. |
t | The front door must not be pushed up or down as a result of the striker pin adjustment. |
By adjusting the striker pin the alignment of the front door with the side panel or the rear door can be adjusted -arrows a- and -arrows b- (wind noise). |
Carry out following work: |
– | Loosen striker pin -2- by loosening bolts -3- in B-pillar. |
Note
Increased forced must be applied so that striker pin -2- can be adjusted with bolts -3- loosened. |
– | Tighten bolts -3- of striker pin -2-. |
Specified torque for bolts -3- 20 Nm. |