Leon Mk1
Removing window lifters |
Carry out the following work: |
– | Remove rear door trim → General body repairs, interior; Rep. gr.70. |
– | Prise out covers -2 and 4-. |
– | Remove door window → Chapter |
– | Only loosen upper bolts -5-, undo and remove lower bolts -5-. |
– | Push window regulators -1 and 3- out of the holes from below, push them upwards -arrow a- and out of the upper holes. |
– | Push cable drum -2- out of catches. |
Note
It is possible that the cables -4- are secured with cable ties. Note the position of these cable ties and then cut them. |
– | Push front window regulator -3- upwards at an angle -arrow b- and pull downwards out of the door -arrow c-. |
Note
Do the same with rear window regulator -1-. |
– | Push rear window regulator -1- upwards at an angle -arrow b- and pull downwards out of the door -arrow c-. |