seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Window in rear door > < Windows in front doors

Leon Mk1

Window shaft seal on outside of rear door: removing and installing
Window shaft seal on outside of rear door: removing and installing
Special tools and workshop equipment required
   
t  Wedge -T10039/1-
t  Removing → Anchor
t  Installing → Anchor
Removing
  Note
t  The inner section of the window well seal is made of metal. If it is bent, the seal can no longer be straightened. It remains „corrugated“.
t  Therefore, the window seal must be removed evenly without being bent.
–  Open the rear door.
  W00-0973
–  Remove the exterior window seal -1-, starting with the end -arrow A-.
–  Insert the wedge -T10039/1- between the exterior window well seal and the door and release the window well seal in the direction of the -arrow-.
Installing
  Note
t  The inner section of the window well seal is made of metal. If it is bent, the seal can no longer be straightened. It remains „corrugated“.
t  Therefore, the window well seal must be inserted evenly without being bent.
  E64-10164
–  Install the exterior window well seal -1-, starting with the end -arrow A-.
–  Engage the exterior window well seal in the door flange and using the wedge -T10039/1-, press evenly on the entire surface of the exterior window well seal.
–  Take care that they are fitted to the flange correctly.
  E64-10165

Window in rear door > < Windows in front doors