seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Front door Windows > < Rear door windows

Leon Mk1

Window shaft seal on inside of rear door: removing and installing
Window shaft seal on inside of rear door: removing and installing
See corresponding table for tools and equipment depending on applicability for Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Lever -U 30800-
  W00-2169
t  Wedge -T10039/1-
t  Disassembly → Anchor
t  Installing → Anchor
Disassembly
l  It is NOT necessary to remove the trim to remove the inner window shaft seal → Item.
–  Remove lining on rear door. → Bodywork, interior assembly work; Rep. Gr.70
  Caution
Remove window shaft seal uniformly without bending.
The inner part of the window shaft seal is metal. If it is bent, it is not possible to return it to the original shape.
  W00-0973
–  Remove inner window shaft seal with aid of wedge -T10039/1-.
Installing
  Caution
install window shaft seal uniformly without bending.
The inner part of the window shaft seal is metal. If it is bent, it is not possible to return it to the original shape.
  E64-10251
–  Attach window shaft seal -2- to door flange -1- and press in uniformly in -direction of arrow-. Completely press in window shaft seal with aid of rubber hammer.
–  Install lining on rear door. → Bodywork, interior assembly work; Rep. Gr.70
  E64-10252

Front door Windows > < Rear door windows