Visual check of the belt lock operation |
Verification of the seat belt buckle: |
–
| Push latch plate into belt buckle until it engages audibly. Push latch plate into belt buckle until it engages audibly. |
t
| If after a minimum of 5 tests, the tongue comes out once or more, the complete seat belt and buckle must be replaced. |
–
| Release the seat belt by pressing on the buckle button with one finger. When the seat belt is loose the tongue should be expelled from the buckle. |
–
| Carry out test at least 5 times. |
t
| If the tongue does not come out every time, the complete seat belt and buckle must be replaced. |
WARNING Under no circumstances must lubricants be used to eliminate noise or difficult movement of the seatbelt locking buttons. |
|
|
|
|