| –
| Cut the remaining material on the glass flange with electric knife -SAT 1561- and its set of knifes -SAT 1561/20-. |
Note! | The remaining material serves as an adhesive base for the new sealant paste. The sticking zones must be kept clean of dirt and grease |
Caution | The activator must not come into contact with the paintwork; if this happens the paintwork could be damaged. |
|
| Exception: if the sticking process is not carried out immediately after the recutting of the remaining cords, these must be reactivated. |
| t
| If the bodywork flange has been reworked on partially renewed, after painting, the new zone must be cleaned and primed correspondingly |
|
|
|
