Leon Mk1
Cordoba Vario tailgate, general installation overview |
1 - | Tailgate |
q | Adjustment → Chapter |
q | Tolerances → Dimensions; Rep. Gr.00. |
q | To remove, it is only necessary to unscrew the hexagonal bolt → Item |
2 - | Lining |
q | Removing and installing → Linings of rear bonnet ; Rep. Gr.70 |
3 - | Clip |
4 - | Adjustment catches |
q | Adjustment → Chapter |
5 - | Ball joints |
q | Tightening torque: 21 Nm |
6 - | Gas damper |
q | Removing and installing → Item |
q | Discharging gas → Chapter |
7 - | Lock plate cover |
8 - | Closing plate |
q | Adjustment: within the oversized holes |
q | Tolerances → Dimensions; Rep. Gr.00. |
9 - | Bolt |
q | Tightening torque 23 Nm |
10 - | Hexagonal bolt |
q | Tightening torque 22 Nm |
q | To remove the tailgate this hexagonal bolt must be unscrewed |
11 - | Hexagonal bolt |
q | Tightening torque: 10 Nm |
12 - | Adapting plate |
q | Thanks to the adapting plate it is not necessary to adjust the tailgate |
13 - | Joint |
14 - | Hinge |
15 - | Twelve-sided bolt |
q | Tightening torque: 10 Nm |
16 - | Joint |